Small Portable Water and Oil Pump for Efficient Water Supply, Drainage, and Black Oil Transfer in Home, Garden, and Industrial Use

Feature:1. Engineering plastic housing, corrosion resistant, high temperature resistant and long life.2. Electric drill driven pump can be used after connecting oil pipe to electric drill.3. The inlet and outlet of the oil pump are removable and easy to carry and store.4. Saves time, improves efficiency, simple and practical, small and compact.5. Small size, light weight and portable, convenient installation and easy operation.Specification:Condition: 100% Brand NewItem Type: Oil PumpMaterial: PlasticColor: BlackWorking Temperature: 5-49℃ (41-120℉)Tube Inner Diameter: 15mm / 0.6inFeature: Installed on electric drill, full automatic, corrosion-resistantApplication: Water, sewage transport for water supply and drainageProduct Size: Approx. 106 x 37 x 64 mm / 4.2 x 1.5 x 2.5 inInstruction:1. In order to achieve the best start-up and extend the service life, add a small amount of lubricating oil to the pump inlet before use, and rinse with clean water after each use.2. Make sure the inlet hose is sealed and as short as possible, the hose should not exceed 9 feet (2.75 meters).3. Working in the temperature range of 5~49℃.4. When pumping solidified abrasive or liquid, use a filter on the inlet line to obtain a longer pump life.5. It is recommended to install the pump on the surface for safe use.6. Install and start the drill. Observe whether a certain amount of fluid in the oil inlet pipe is drawn into the pump within 15-20 seconds. If not, check whether the oil inlet pipe is correctly installed on the oil inlet pump. Don't run dry. If the pump fails to start, check the hose for kinks or blockage. The pump depends on whether the fluid is used for lubrication7. It is r